Initialization errors (1xxx)
1002 Error preprocessing configuration file
1003 Configuration file error
An error occurred during loading of the configuration file. Other messages will normally have preceded this message to highlight the specific error that occurred. The preprocess pass through the file is used to set up any $environment commands before the main pass through the file, and also to handle certain hardware parameters (for example, $dtg_parm) that have to be set before the board is initialized.
1006 MSMQ error on line #n: x
The system was unable to initialize the MSMQ queue for e-mail FS files
1009 Unable to initialize Netaccess board for line x (x): exit(1)
1010 Unable to initialize Brooktrout board for line x (x:x): exit(1)
1015 No Brooktrout boards found or Boston Service not running
1016 Too many Brooktrout channels found
1017 Too many Dialogic telephony channels found
1018 Too many Dialogic voice/fax channels found
1021 Too many Dialogic Diva fax channels found
1027 Brooktrout startup failure
1028 Cannot determine Brooktrout board features
1029 Board startup failure, details in error trace file
1030 Board init failure, details in error trace file
1031 Unable to open Dialogic channel x, code n
1032 Unable to open Dialogic device x, code n
1034 Unable to find or read BTCALL.CFG
1035 Unable to open Dialogic board x, code n
1036 GFAX environment variable not defined
The necessary drivers for your fax board(s) have not been initialized, or the board(s) which they control are not properly installed or set up. Check that Windows is loading the correct drivers and that they are not reporting errors at load time in the event log.
1037 Unable to find or read file x
1038 No BTNA.CFG file
1039 BCHANMAP missing in x
The Brooktrout Netaccess configuration file has not been set up correctly.
Incorrectly set up Brooktrout configuration.
1727 License limit exceeded by n, extra resources unused
Not all available Dialogic SC-Bus resources are available to CopiaFacts
1728 Out of memory for startup
Consult your CopiaFacts supplier for assistance
1729 Unable to get Dialogic board count
1730 Unable to open Dialogic board
Check the Dialogic install settings
1731 Cannot assign telephony channel n for line m
1732 Cannot assign voice channel n for line m
1733 No voice channel n exists for line m
1734 Cannot assign fax channel n for line m
1735 Unknown board type x for channel n for line m
1736 No x channels free for dynamic allocation
1737 Option for line n requires voice
1738 Option requires fax
1739 Option requires fax and voice
The hardware and line settings defined by the configurator CFHWL for the node and saved in FAXCOUNT.HWL do not match the physical hardware found or the line operations requested.
1743 Get DEVINFO failed for telephony channel x
1744 Not SC-Bus in telephony channel x
1747 Get DEVINFO failed for voice channel x
1748 Get DEVINFO failed for fax channel x
1749 Voice channel x is analog, defined as span
1750 Voice channel x is span, defined as analog
1751 Voice channel x is not SC-Bus, defined as resource
1752 Fax channel x is not SC-Bus, defined as resource
The Dialogic hardware and line settings defined by the configurator FFHWL for the node and saved in FAXCOUNT.HWL do not match the physical hardware found or the line operations requested.
1753 x channel permanent allocation failed
1754 Cannot mix fax resource types in one system
The hardware configuration is invalid
1755 Diva SDK version mismatch
See the Dialogic Diva Server Fax topic under Hardware for details of supported versions.
1756 Warning: cannot find a wave output device for phone simulation
The configured phone/fax simulation feature is not available because this node has no voice board.
1757 Telephony channel n has been excluded from use by CopiaFacts
1758 Voice channel n has been excluded from use by CopiaFacts
1759 Fax channel n has been excluded from use by CopiaFacts
An $exclude_channel command has excluded a channel which the CopiaFacts configuration is attempting to make use of.
1760 Dialogic channel n configured as PRI, detected as robbed-bit
1761 Dialogic channel n configured as robbed-bit, detected as PRI
1762 Board count %d exceeds maximum permitted by CopiaFacts
There is a problem with Dialogic configuration in FFHWL.
1763 Unable to get device information for Dialogic Diva board n, error n
1764 Unable to register with DivaServer API, error x
1765 Unable to initialize DivaServer API, error x
There is a problem with the Dialogic Diva installation
1766 No voice capability on this Brooktrout TR1034 channel
The Brooktrout configuration is incorrect
1767 Unable to set device status reporting
The board in use does not support device status reporting.