Set Dialogic PRI Board Make-Call Parameters

$mcb_parm board parm=parmstring

This command allows setting of low-level parameters in the PRI make-call block on a per-board basis. Please consult Copia or your CopiaFacts supplier before using this command. Incorrect settings can disrupt the operation of your system and may also invalidate the PTT approval of your board.

The parameters on this command are used as follows:

board the board number (x in dtiBx) affected, or * for all telephony boards.
parmstring a parameter specification as described below.

The parameter specification uses a keyword=value syntax with the keyword selected from the list below. Only one keyword and two-digit hexadecimal value can be specified per command, but you may use multiple commands to set all the values you need. Valid keywords and default values are as follows:

 

bc_xfer_cap                E1: 00   T1: 00

        BEAR_CAP_SPEECH          00  Speech Bearer Capability

        BEAR_CAP_UNREST_DIG      08  Unrestricted Digital Capability

        BEAR_CAP_REST_DIG        09  Restricted Digital Capability

        BEAR_CAP_3DOT1K_AUDIO    10  3.1KHz Audio Capability

        BEAR_CAP_7K_AUDIO        11  7KHz Audio Capability

        BEAR_CAP_VIDEO           18  Video Capability

 

bc_xfer_mode                E1: 00        T1: 00

        ISDN_ITM_CIRCUIT         00  info transfer mode - circuit mode

        ISDN_ITM_PACKET          02  info transfer mode - packet mode

 

bc_xfer_rate                E1: 10        T1: 10

        BEAR_RATE_64KBPS         10  B_CHANNEL_UNITS 1X64

 

usrinfo_layer1_protocol                E1: 03        T1: 02

        ISDN_UIL1_CCITTV110      01  user info layer 1 - CCITT V.110/X.3

        ISDN_UIL1_G711ULAW       02  user info layer 1 - G.711 u-law

        ISDN_UIL1_G711ALAW       03  user info layer 1 - G.711 A-law

        ISDN_UIL1_G721ADCPM      04  user info layer 1 - G.721 ADCPM

        ISDN_UIL1_G722F725       05  user info layer 1 - G.722 and G.725

        ISDN_UIL1_H261           06  user info layer 1 - H.261

        ISDN_UIL1_NONCCITT       07  user info layer 1 - non-CCITT

        ISDN_UIL1_CCITTV120      08  user info layer 1 - CCITT V.120

        ISDN_UIL1_CCITTX31       09  user info layer 1 - CCITT X.31

        ISDN_UIL1_DEFAULT        FF  user info layer 1 - Default Value

 

usr_rate                E1: 00        T1: FF

        ISDN_UR_EINI460          00  user rate - E bits in I.460

        ISDN_UR_600              01  user rate - 0.6 kbits

        ISDN_UR_1200             02  user rate - 1.2 kbits

        ISDN_UR_2400             03  user rate - 2.4 kbits

        ISDN_UR_3600             04  user rate - 3.6 kbits

        ISDN_UR_4800             05  user rate - 4.8 kbits

        ISDN_UR_7200             06  user rate - 7.2 kbits

        ISDN_UR_8000             07  user rate - 8.0 kbits

        ISDN_UR_9600             08  user rate - 9.6 kbits

        ISDN_UR_14400            09  user rate - 14.4 kbits

        ISDN_UR_16000            0A  user rate - 16.0 kbits

        ISDN_UR_19200            0B  user rate - 19.2 kbits

        ISDN_UR_32000            0C  user rate - 32 kbits

        ISDN_UR_48000            0E  user rate - 48 kbits

        ISDN_UR_56000            0F  user rate - 56 kbits

        ISDN_UR_64000            10  user rate - 64 kbits

        ISDN_UR_134              15  user rate - .1345 kbits

        ISDN_UR_100              16  user rate - .100 kbits

        ISDN_UR_75_1200          17  user rate - .075/1200 kbits

        ISDN_UR_1200_75          18  user rate - 1200/.075 kbits

        ISDN_UR_50               19  user rate - .050 kbits

        ISDN_UR_75               1A  user rate - .075 kbits

        ISDN_UR_110              1B  user rate - .110 kbits

        ISDN_UR_150              1C  user rate - .150 kbits

        ISDN_UR_200              1D  user rate - .200 kbits

        ISDN_UR_300              1E  user rate - .300 kbits

        ISDN_UR_12000            1F  user rate - 12 kbits

        ISDN_UR_DEFAULT          FF  user rate - Default

 

destination_number_type                E1: 00        T1: 02

        EN_BLOC_NUMBER           00  Number is sent en-bloc

        INTL_NUMBER              01  International number

        NAT_NUMBER               02  National number

        LOC_NUMBER               04  Local (directory) number

        OVERLAP_NUMBER           05  Number is sent overlap

 

destination_number_plan                E1: 01        T1: 01

        UNKNOWN_NUMB_PLAN        00  Unknown plan

        ISDN_NUMB_PLAN           01  ISDN numb. plan E.164

        TELEPHONY_NUMB_PLAN      02  Telephony numb. plan E.163

        PRIVATE_NUMB_PLAN        09  Private numbering plan

 

destination_sub_number_type     E1: 00        T1: FF

        EN_BLOC_NUMBER           00  Number is sent en-bloc

        INTL_NUMBER              01  International number

        NAT_NUMBER               02  National number

        LOC_NUMBER               04  Local (directory) number

        OVERLAP_NUMBER           05  Number is sent overlap

        disable                  ff  Don't send this info element

 

destination_sub_number_plan     E1: 00        T1: FF

        UNKNOWN_NUMB_PLAN        00  Unknown plan

        ISDN_NUMB_PLAN           01  ISDN numb. plan E.164

        TELEPHONY_NUMB_PLAN      02  Telephony numb. plan E.163

        PRIVATE_NUMB_PLAN        09  Private numbering plan

        disable                  ff  Don't send this info element

 

origination_number_type                E1: 02        T1: 02

        EN_BLOC_NUMBER           00  Number is sent en-bloc

        INTL_NUMBER              01  International number

        NAT_NUMBER               02  National number

        LOC_NUMBER               04  Local (directory) number

        OVERLAP_NUMBER           05  Number is sent overlap

        disable                  ff  Don't send this info element

 

origination_number_plan                E1: 01        T1: 01

        UNKNOWN_NUMB_PLAN        00  Unknown plan

        ISDN_NUMB_PLAN           01  ISDN numb. plan E.164

        TELEPHONY_NUMB_PLAN      02  Telephony numb. plan E.163

        PRIVATE_NUMB_PLAN        09  Private numbering plan

        disable                  ff  Don't send this info element

 

origination_sub_number_type     E1: 00        T1: FF

        EN_BLOC_NUMBER           00  Number is sent en-bloc

        INTL_NUMBER              01  International number

        NAT_NUMBER               02  National number

        LOC_NUMBER               04  Local (directory) number

        OVERLAP_NUMBER           05  Number is sent overlap

        disable                  ff  Don't send this info element

 

origination_sub_number_plan     E1: 00        T1: FF

        UNKNOWN_NUMB_PLAN        00  Unknown plan

        ISDN_NUMB_PLAN           01  ISDN numb. plan E.164

        TELEPHONY_NUMB_PLAN      02  Telephony numb. plan E.163

        PRIVATE_NUMB_PLAN        09  Private numbering plan

        disable                  ff  Don't send this info element

 

facility_feature_service                E1: 01        T1: FF

        ISDN_FEATURE             00  feature/service - feature

        ISDN_SERVICE             01  feature/service - service

        disable                  ff  Don't send this info element

 

facility_coding_value                E1: FF        T1: FF

        ISDN_CPN_PREF            01  facility coding - CPN preferred

        ISDN_SDN                 01  service coding - SDN

        ISDN_BN_PREF             02  facility coding - BN preferred

        ISDN_ACCUNET             06  service coding - ACCUNET SDS

        ISDN_LONG_DS             07  service coding - Long distance

        ISDN_INT_800             08  service coding - international 800

        ISDN_CA_TSC              09  service coding - CA TSC

        ISDN_ATT_MULTIQ          10  service coding - ATT MultiQuest

        disable                  ff  Don't send this info element

Example:

$mcb_parm * origination_number_plan=00  ; unknown number plan

$mcb_parm * destination_number_plan=00  ; unknown number plan