Specify E-Mail Binding Addresses for the node
This command specifies the local addresses of the network adapters to be used on the machine being used to transmit e-mail. This command should be used when a node has multiple NIC cards and you need to select different network adapters for different e-mail traffic.
When you use this command, an $email_node_localnames command should also be used.
The parameters on this command are used as follows:
|nodename||The name of the CopiaFacts node (e.g. M1). The use of * to specify all nodes is not valid on this command.|
|iname||the comma-separated IP addresses associated with each NIC in the node.|
The CopiaFacts variable ADAPTER_INDEX is used to select which of the comma-separated addresses should be used for a particular transmission. If this variable is not specified, the default value is 1 and the first address on this command will be used. If the entry is empty (two consecutive commas) or if the index value exceeds the number of addresses supplied, or if no command is supplied, a blank value will be used. This is unlikely to be effective in selecting the correct adapter.
For more information about how addresses are used for e-mail transmissions, see $email_localname.
$email_node_localnames M1 "[220.127.116.11],[18.104.22.168]"
$email_node_localnames M2 "[22.214.171.124],[126.96.36.199]"
$email_node_bindnames M1 "192.168.178.31,192.168.1.21"
$email_node_bindnames M2 "192.168.178.32,192.168.1.22"