$baud_min [USR, UJP]
Override the Lowest Transmission Speed Allowed
This command sets the lowest baud rate allowed for image transmission. If the negotiated baud rate is below the minimum specified, the call will be terminated. For Diva boards, the call will also be ended if the baud rate drops below the minimum during transmission.
Important note: this command affects all outbound operations done with this user profile, including broadcasts and server operations.
CopiaFacts does not prevent you from setting the minimum baud rate to be greater than the maximum baud rate. If this is the case on a system supporting both commands, all faxes will fail.
This command can be overridden for a specific application by the MIN_BAUD variable.
The parameter on this command is used as follows:
|baud||minimum rate, a multiple of 2400 up to 33600|
Hardware Issues: This command is currently only available for Dialogic, Diva and Brooktrout TR1034 boards.
Default: If this command is not used in the user profile, the value specified for the line with the $baud_min command in the configuration file is used. If there is no applicable command in the configuration file, all baud rates will be acceptable.
$baud_min 7200 ; stop transmission if under 7200 baud