Set the Lowest Transmission Speed Allowed

$baud_min line baud

This command sets the lowest baud rate allowed for image transmission.  If the negotiated baud rate is below the minimum specified, the call will be terminated.  For Diva boards, the call will also be ended if the baud rate drops below the minimum during transmission.

This command can be overridden for a specific application by using a $baud_min command in the user profile or with the MIN_BAUD variable.

CopiaFacts does not prevent you from setting the minimum baud rate to be greater than the maximum baud rate. If this is the case on a system supporting both commands, all faxes will fail.

The parameters on this command are used as follows:

line the line number or line group(s) affected, or * for all lines. The same line must not be specified more than once.
baud minimum rate, a multiple of 2400 up to 33600.

Hardware Issues: This command is currently only available for Dialogic, Diva and Brooktrout TR1034 boards.

Default: All baud rates will be acceptable.

Example:

$baud_min * 7200 ; stop transmission if under 7200 baud